Installing a tag

Once you have received your toll tag, the next step is to install it in your vehicle. To help with installation, find below a video and a tag installation guide.

To view the “eToll tag installation Guide” video, please accept the use of marketing cookies by updating the
cookie consent here.

Installing your tag in a car

01 Insert the Tag

Attach the holder to the tag by sliding into the slot of the tag, as pictured.

02 First Check the Position

Before you remove the adhesive protection, place the holder incluiding the tag horizontally behind the rear view mirror, making sure that it will fit and not obstruct the driver´s view.

03 Clean your windscreen

With the cleaning tissue provided, clean the windscreen where the tag will be placed. Make sure that the windscreen is dry and has a temperature of at least 15º. If necessary, dry with a cloth.

04 Remove Adhesive Protection

The tag holder is now ready to attach to the windscreen

05 Attach the holder

Fix the tag holder (with tag attached) on the windscreen, making sure that the tag is straight. Hold firmly for at least 10 seconds. If your windcreen is UV-coated, install the holder on the black dots.

Installing your tag in a bus, lorry or truck

 

01 Insert the Tag

Attach the holder to the tag by sliding into the slot of the tag, as pictured.

02 First Check the Position

Before you remove the adhesive protection, place the holder incluiding the tag vertically at the bottom of the windscreen, making sure that it will fit and not obstruct the driver´s view.

03 Clean your windscreen

With the cleaning tissue provided, clean the windscreen where the tag will be placed. Make sure that the windscreen is dry and has a temperature of at least 15º. If necessary, dry with a cloth.

04 Remove Adhesive Protection

The tag holder is now ready to attach to the windscreen

05 Attach the holder

Fix the tag holder (with tag attached) on the windscreen, making sure that the tag is straight. Hold firmly for at least 10 seconds. 

Note: Some windscreens have a metallic layer to reflect heat from the sun. In this case the tag must be placed within the designated areas of the windscreen without – these are normally marked with a different colour or pattern.